Sharp MX-B401, Руководство по эксплуатации

Страница: 665 / 837

8-22
TROUBLESHOOTING
Contents
Transmission does
not take place. Does the image file exceed the e-mail
attachment limit set in the system
settings (administrator)? If your administrator has set a limit on the size of
transmitted files, a file that exceeds the limit cannot be
transmitted. Check with your administrator.
Did the image file exceed the file
attachment size limit of your mail
server?
(When Scan to E-mail is used.) Reduce the size of the file attachment (reduce the
number of pages scanned). The size of the file can also
be reduced by scanning using a lower resolution setting.
Ask your mail server administrator what the file size limit
is for one e-mail transmission.
Has the folder on the destination
computer been set as a shared folder so
that files can be sent to it?
(When using Scan to Network Folder.) If the destination folder is not configured as a shared
folder, select "share" in the folder properties. If the folder
was moved or otherwise changed, the "share" setting
may have been canceled.
Is "IPsec Settings" enabled on the
machine?
(When using Scan to Network Folder.) When "IPsec Settings" is enabled in the system settings
(administrator), direct printing of a file in a shared folder
may not be possible in some computer environments.
For information about "IPsec settings", consult your
administrator.
➞
System Settings (Administrator) > "Security Settings"
> "IPsec Settings"
Did you place a long size original on the
document glass when it is scanned? A long size original cannot be scanned from the
document glass. Place originals in the document feeder
tray of the automatic document feeder.
An address cannot be
specified. Have functions been disabled by the
administrator? Some functions may have been disabled in the system
settings (administrator). Check with your administrator.
When user authentication is enabled, the functions that
you can use may be restricted in your user settings.
Check with your administrator.
Mode cannot be
selected.
Auto selection of the
color mode does not
take place correctly. Are you scanning one of the following
types of originals?
When Black & White is not selected:
• Are there colors or coloring in the
paper?
When Color is not selected:
• Is the color in the original very light?
• Is the color in the original very dark,
almost black?
• Is only a very small area of the
original colored?
When the color mode is set to "Auto", the machine
detects whether the original is black and white or color
when the [START] key is pressed; however, in the
cases at left, automatic detection may not give the
correct result. In this event, specify the color mode
manually.
Problem Point to check Solution