Sharp MX-B401, Руководство по эксплуатации

Страница: 97 / 837

2-13
COPIER
Contents
3
Specify the original size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
When placing an AB size or non-standard size original, specify the original size as explained in " ORIGINAL SIZES "
(page 2-27).
4
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS (page 2-9)
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
5
Set the number of copies (number of
sets) with the numeric keys.
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
6
Press the [START] key.
Normally copying will start.
Depending on the copy settings (2-sided copying, etc.), copying may not begin until all originals have been scanned. In this
case, go to the next step.
7
Remove the original and place the next original, and then press the [START] key.
Repeat this step until all originals have been scanned.
5 ½ x8 ½
8 ½ x13
8 ½ x11
8 ½ x14
8 ½ x13
Custom Si z e None
Original
OK
Si z e Input
Inch
AB
2
5
(2) (1)
8 ½ x11
8 ½ x11
5 ½ x8 ½
Auto
8 ½ x11
Plain
8 ½ x14
8 ½ x11
8 ½ x11
Special Modes
Plain
2 - Sided Copy
Output
File
Quick File
Copy Ratio
100 %
3.
2.
1.
Original Paper Select
Exposure
Auto
4.
Plain
7
8 ½ 11
Special Modes
2 - Sided Copy