Sharp MX-B401, Руководство по эксплуатации

Страница: 121 / 837

2-37
COPIER
Contents
Enter the paper size of the bypass tray
When the [Custom Size] key is touched, the paper size entry screen appears.
Touch the [X] key and enter the horizontal dimension of
the paper with the
keys, and then touch the [Y]
key and enter the vertical dimension. When finished,
touch the [OK] key.
7
Select the bypass tray.
(1) Touch the paper size key of the bypass tray.
(2) Touch the [OK] key.
8
Press the [START] key.
Scanning begins.
• If the originals were placed in the document feeder tray, the originals are copied.
• If you placed the originals on the document glass, scan each page one page at a time.
When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
press the [Read-End] key.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
Paper Select
Paper Tray Bypass Tray
OK
Plain
Plain
Plain
2. 5 ½ x8 ½
8 ½ x11
3. 8 ½ x14
4. 8 ½ x11
1.
Plain
8 ½ x11
Plain
(1) (2)
OK
OK
(5 1/2~14)
inch
(5 1/2~8 1/2)
inch
14 X
Y 8 ½
Bypass Tray Type/Si z e Setting
Si z e Input
X14 Y8 ½
X14 Y8 ½
X14 Y8 ½
AB
Inch
Stored custom paper sizes appear in the keys on the left side of the screen. Custom paper sizes are stored in the system
settings. For details, see "
Paper Tray Settings " (page 7-13) in "7. SYSTEM SETTINGS". If the key for the size that you wish
to enter appears, touch that key.