manualshive.com logo in svg

Roland VersaUV LEJ-640, Заметки по обслуживанию, Страница: 1 / 321

Поделиться
Скачать
Roland VersaUV LEJ-640 Скачать руководство пользователя страница 1

SERVICE NOTES

Copyright     2013 ROLAND DG CORPORATION

c

 70158-14

Users of this Service Note shall be deemed to agree with the following Terms of Use.

1.  USERS

This Service Note is only for authorized persons with user ID and password issued by Roland DG 
Corporation. 

2.  PURPOSE

Authorized persons can use this Service Note only for the purposes of selling and providing to the 
customers maintenance service of LEJ-640. 

3.  REUSE

Authorized persons shall not disclose, transfer, rent or distribute this Service Note to, or allow this 
Service Note to be used in any manner by, any third party other than authorized persons.  

4.  REPRODUCTION

Authorized persons shall not copy, change or alter this Service Note without permission of Roland 
DG Corporation.

 

5.  EFFECT OF VIOLATION

Regardless of circumstances, we will vigorously respond to any violation hereof, through legal action.

TERMS OF USE

Confi dential

Содержание VersaUV LEJ-640


































































































































































































































































































































Отзывы:

Нет отзывов