Ross Synergy 100, Руководство по установке, Страница: 93 / 246

Synergy 100 Installation Guide (v16.10-S100) BNC Configuration and Check • 6–5
Setting Up Tallies
The Tally Menu allows you to select the tally relays that will be activated when control panel buttons
are pressed. Your associations on this menu affect the tally connectors (and associated relay
electronics) on the control panel.
The Synergy 100 panel comes with 16 standard panel tallies. If the Frame Tally option has been
purchased, an additional 16 configurable tallies are available within the Synergy frame and can be
assigned to any video input.
Use the following procedure to set up your tallies:
1. Navigate to the Inputs Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
1. Inputs
to display the Inputs Menu .
Inputs Menu
2. Press 2. Tally to display the Tally Menu .
Tally Menu
3. Select the tally you want to assign as follows:
• Press
0. Tally
.
• Use the
UP ARROW
or
DOWN ARROW ( 1
or
10 )
buttons to select the tally you
want to assign to the input BNC.
• Press the right
SEL
button to accept the new settings.
Operating
Tip
For wiring convenience, it is recommended that you make your tally
associations on a 1:1 basis, with tally numbers matching input BNC
numbers, such as Input
8 is assigned to Tally 8 .
Inputs
0. Inputs
1. Panel
2. Tally
3. Audio
MENU
Exit 100
Previous 10
Down 1
Up SEL
Accept
Tally
0. Tally
1. Input Frame 1
BNC 1
2. Type On Air
MENU
Exit 100
Previous SEL
Accept 10
Down
1
Up