Ross Synergy 100, Руководство по установке, Страница: 123 / 246

Synergy 100 Installation Guide (v16.10-S100) Communication Setup • 7–23
Setting Up Audio Groups
The Audio Groups Menu allows you to set up groups of audio channels, if desired, by connecting up
to three channels together. As you can assign up to two groups per BNC, as described in the section
“
Assigning Audio Channels ” on page 7–21, a total of six audio channels can be linked to a single
BNC.
Use the following procedure to assign audio channels to an Audio Group:
1. Navigate to the Inputs Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
1. Inputs
to display the Inputs Menu .
Inputs Menu
2. Press 3. Audio to display the Audio Menu .
Audio Menu
Note It is not necessary to set up groups in order to use the audio mixer
interface.
Inputs
0. Inputs
1. Panel
2. Tally
3. Audio
MENU
Exit 100
Previous 10
Down 1
Up SEL
Accept
Audio
0. Channel
1. Level Chan 1
75%
2. Groups
MENU
Exit 100
Previous SEL
Accept 10
Down
1
Up