Ross Synergy 100, Руководство по установке, Страница: 51 / 246

Synergy 100 Installation Guide (v16.10-S100) Installation • 2–17
Remote Aux Bus Panels (Rear)
Both panel types require one rack unit of space for installation and both types require their own AC
source for DC power.
Aux Panel Rear Layout and Connection
Connector layout is identical for all remote Aux panels.
1. Power Connector
One DC connector is provided for +5 VDC panel power.
2. GPI Connector
One 9-pin “D” GPI connector is provided for special GPI triggers that allow a camera
operator to manually override the Aux panel selection. Refer to the section “
Remote
Aux Panel Cabling ” on page 3-3 for connection details.
3. Switcher Connector
One 6-pin RJ-12 Telco connector is provided for connecting to the Aux connectors on
the rear of the frame. Refer to the section “
Remote Aux Panel Cabling ” on page 3-3 for
connection details. For pinout details, refer to the section “ Pinouts ” on page 10-8.
4. Remote Connector
One 6-pin RJ-12 Telco connector is provided for daisy-chaining the remote panel to the
next remote Aux panel in line. Refer to the section “
Remote Aux Panel Cabling ” on
page 3-3 for connection details. Refer to the section “ Pinouts ” on page 10-8 for pinout
details.
5. AC Adapter
One AC Adapter (90 - 264 VAC) is provided with each remote Aux panel as a source of
+5 VDC. Please note:
• 90 - 264 VAC adapter, p/n 103-012
Refer to the section “ Remote Aux Panel Cabling ” on page 3-3 for connection details.
1) Power Connector
2) GPI Connector 3) Switcher Connector
4) Remote Connector 5) AC Adapter
6) Cable Retainer
90 - 264 VAC Adapter
(p/n 103-012)
J5
MAIN
J1
ECHO
J4
POWER
J2
GPI
This class A device complies with Canadian ICES-003 and part 15 of the FCC Rules
Operation is subject to the following 2 conditions: (1) This device may not cause
harmfull interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
1 2 3 4
+5 V REG
1 A
AC
Source
DC
Connector
5
6
R