Ross Synergy 100, Руководство по установке, Страница: 165 / 246

Synergy 100 Installation Guide (v16.10-S100) Additional Installation Setups • 8–31
GPIs Menu
2. Press 1. Remote GPIs to display the Remote GPIs Menu .
Remote GPIs Menu
The Remote GPIs Menu allows you to select a remote panel ( 1 - 8 ) and a GPI ( 1 - 8 ),
assign it to a specific Aux Bus ( 3 - 10 ) and associate that GPI with a specific BNC.
3. Select a remote panel as follows:
• Press 0. Rem Panel .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the remote
panel that contains the GPI input that you wish to assign.
• Press the right SEL button to accept the new settings.
4. Select a GPI Input as follows:
• Press 1. GPI Input .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the GPI
input, between 1 and 8, that you wish to assign.
• Press the right SEL button to accept the new settings.
5. Assign a specific Aux Bus as follows:
• Press 2. Aux Bus .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the Aux Bus
output, between 3 and 10 , that you wish to override.
• Press the right SEL button to accept the new settings.
GPIs
0. Frame GPIs
1. Remote GPIs
MENU
Exit 100
Previous SEL
Accept 10
Down
1
Up
2. GPI Outputs
Remote GPIs
0. Rem Panel
1. GPI Input 1
1
2. Aux Bus
3. BNC 3
1
MENU
Exit 100
Previous SEL
Accept 10
Down 1
Up
4. Type/Edge Low Override