Ross Synergy 100, Руководство по установке, Страница: 25 / 246

Synergy 100 Installation Guide (v16.10-S100) Introduction • 1–9
Pattern Generators
The Synergy 100 includes (as standard) both primary and secondary pattern generators that are used
for wipe transitions and preset patterns. The primary generator is equipped with extensive classic,
rotary, and matrix wipes. The secondary generator provides classic patterns.
Chroma Keying
Chroma keying is available in the Effects Keyers . Each high quality chroma keyer features internal
4:4:4 chroma channel interpolation from any of the 4:2:2 inputs. Using the control panel, you can
adjust the Chroma key’s clip, gain, rejection, suppression, and hue. The
Auto Chroma Key feature
allows the user to quickly and automatically achieve the best chroma key for a selected color.
Untimed Aux Buses
Eight untimed Aux Buses are standard, each of which can be used to route video to monitors, DVE
channels, still stores, tape machines, etc. Aux Buses 3 through 10 can be used to route any untimed
signals to other external sources, including:
• Black (as supplied by the “601 REF IN” BNC), plus all primary inputs
• Clean feed (if the option is installed)
• MLE program and preview outputs
Standard Digital Outputs
The following table lists all standard Synergy 100 digital outputs:
Note Black, clean feed, and program and preview outputs can only be routed
to the Aux Buses using a Remote Aux Panel. All other signals
(primary inputs) can be routed using either the remote panels or the
Synergy 100 control panel itself.
Since the Synergy 1 frame generates its own internal black signal,
selecting
BLACK
on an untimed Aux Bus will route to the output
whatever is connected to your “
601 REF IN
” BNC. See table below.
Aux Bus Capabilities by Timing Status
Aux Bus Timing Black PV Clean Feed PGM
3 - 10 Untimed Ref Yes Yes Yes
Synergy 100 Digital Outputs
Output Type Quantity
Program 2
Preview 2
Aux Bus 8
Total Outputs 12