Ross Synergy 100, Руководство по установке, Страница: 50 / 246

2–16 • Installation Synergy 100 Installation Guide (v16.10-S100)
Installing Optional Remote Aux Bus Panels
Remote Aux Bus control panels are self-contained units that have their own power supply. The main
AUX PANEL
connects to the frame via a 6-pin shielded Telco connector labeled
MAIN
, on the rear of
the remote panel. Multiple remote panels may be connected in a daisy-chain fashion through the
ECHO
port.
Even though an unlimited number of Aux panels can be connected to each of the
AUX PANEL
connectors, for example
ECHO
to
MAIN
, a practical limit of 8 Aux panels should be observed. This
limit provides better response time and reduces delay.
There are two types of remote Aux panels available:
• Assignable panels control all 8 Aux Bus outputs.
• Non-assignable (or “dedicated”) panels control a single Aux Bus output.
Assignable Remote Aux Panel (Front)
Assignable Remote Aux Bus Panels act as a 20 x 8 routing switcher, enabling the user to assign any
one of the possible 20 sources on the panel, to any one of the 8 Aux Buses.
Assignable Remote Aux Panel
Dedicated Remote Aux Bus Panel (Front)
Dedicated Remote Aux Bus Panels (non-assignable) act as a 20 x 1 routing switcher, enabling the
user to assign any one of the 20 possible sources on the panel, to a predetermined specific Aux Bus.
Dedicated Remote Aux Bus panels are ordered to control a specific Aux Bus and are preset at the
factory. Contact your Ross Video representative for ordering information.
Dedicated Remote Aux Panel
2 3 4 5 6 7 8
MLE
PV
CLEAN
FEED
PGM
ASSIGN
10
ASSIGN
9
ASSIGN
8
ASSIGN
7
ASSIGN
6
ASSIGN
5
ASSIGN
4
ASSIGN
3
ASSIGN
2
ASSIGN
1
SHIFT
10
9
BLACK
1
DVE
SEND
BLACK
2 3 4 5 6 7 8 9
MLE
PV
CLEAN
FEED
PGM
1
SHIFT
10
DVE
SEND