Ross Synergy 100, Руководство по установке, Страница: 147 / 246

Synergy 100 Installation Guide (v16.10-S100) Additional Installation Setups • 8–13
Remote Aux Panel GPI Group and Offset Programming Buttons
7. Press the crosspoint for the group and offset that you want to assign to this Aux Panel.
The button lights to indicate your selection. Only one switch can be lit at a time.
8. When programming for this panel is complete, press SEL in the System Control group
on the Synergy 100 control panel to store all new settings and exit the programming
mode. All Remote Aux Panels return to their normal operating mode and each panel’s
new “group and offset” is stored in the remote panel’s non-volatile memory.
9. Repeat steps 2 through 8 for each remaining panel for which you want to program
remote Aux GPI groups and offsets.
When programming of all of your Remote Aux Panels is complete, proceed to the the section “ Setting
up Remote Aux Panel GPIs ” on page 8-27 to configure the Remote Aux Panel GPI inputs.
Field Dominance
The Field Dominance feature allows you to select when the Synergy switcher will trigger a transition
from one video source to the next. Each video frame is composed of an Odd Field and an Even Field,
Field 1 and Field 2 respectively.
Use the following procedure to set up the Field Dominance feature:
1. Navigate to the Outputs Menu as follows:
• Press
MENU
to display the Main Menu on the Preview Overlay .
• Press
2. Outputs
to display the Outputs Menu .
Outputs Menu
2. Toggle 5. Fld Dom to select a field as follows:
• Field1 — Select this option to enable the Synergy 100 switcher to trigger the
transition to the next video source after the Odd Field of the previous video source.
This is the default setting.
• Field2 — Select this option to enable the Synergy 100 switcher to trigger the
transition to the next video source after the Even Field of the previous video source.
BLACK
2 3 4 5
1
6 7 8
9
DVE
SEND
MLE
PV
CLEAN
FEED
PGM
ASSIGN
8
ASSIGN
7
ASSIGN
6
ASSIGN
5
ASSIGN
4
ASSIGN
3
ASSIGN
2
ASSIGN
1
Sets panel to Group 4, Offset 3
Sets panel to Group 3, Offset 2
Sets panel to Group 2, Offset 1
Sets panel to Group 1, Offset 0 Sets panel to Group 5, Offset 4
Sets panel to Group 6, Offset 5
Sets panel to Group 7, Offset 6
Sets panel to Group 8, Offset 7
SHIFT
10
Outputs
0. Aspect
1. Ref Dly 4:3
300
MENU
Exit 100
Previous SEL
Accept
10
Down
1
Up
2. Clean BeforeKeys
3. Ancillary data
4. RemAuxPrg Off
5. Fld Dom Field1