Ross Synergy 100, Руководство по установке, Страница: 131 / 246

Synergy 100 Installation Guide (v16.10-S100) Communication Setup • 7–31
3. Assign the number of messages that are sent to the serial tally interface device as
follows:
• Press
8. Option
.
• Use the
UP ARROW
or
DOWN ARROW ( 1
or
10 )
buttons to select
Data Txfr
.
• Press the right
SEL
button to accept the new settings.
• Press
9. Data Txfr
.
• Use the
UP ARROW
or
DOWN ARROW ( 1
or
10 )
buttons to select the amount
of messages sent to the serial tally device. You can choose between the following:
~
Normal
— Use this option to have what is on the MLE, Keys, and Aux buses,
plus the names of the currently loaded stills sent to the serial tally interface
device.
~
Complete
— Use this option to have all switcher information sent to the serial
tally interface device.
~
Minimal
— Use this option to have only what is on MLE and Keys sent to the
serial tally interface device.
• Press the right
SEL
button to accept the new settings.
4. Assign whether or not an initialization message is sent to the serial tally interface device
when the switcher starts sending data as follows:
• Press
8. Option
.
• Use the
UP ARROW
or
DOWN ARROW ( 1
or
10 )
buttons to select
Start
.
• Press the right
SEL
button to accept the new settings.
• Press
9. Start
.
• Use the
UP ARROW
or
DOWN ARROW ( 1
or
10 )
buttons to select whether or
not an initialization message is sent when the switcher starts sending data. You can
choose between the following:
~
None
— Use this option to have no initialization message sent.
~
Init
— Use this option to have an initialization message sent when the switcher
starts sending data to the serial tally interface device.
• Press the right
SEL
button to accept the new settings.
5. Assign the messages that the switcher will sent to the serial tally interface device when
the switcher is at black as follows:
• Press 8. Option .
• Use the
UP ARROW
or
DOWN ARROW ( 1
or
10 )
buttons to select
At Black
.
• Press the right
SEL
button to accept the new settings.
Note When menu item 8. Option is set to Data Txfr , menu item
9. Reserved changes to 9. Data Txfr .
Note When menu item 8. Option is set to Start , menu item 9. Reserved
changes to 9. Start .
Note When menu item 8. Option is set to At Black , menu item
9. Reserved changes to 9. At Black .