Ross Synergy 100, Руководство по установке, Страница: 113 / 246

Synergy 100 Installation Guide (v16.10-S100) Communication Setup • 7–13
Setting Up Communication with a Remote Audio Mixer
In order to have the Synergy 100 Switcher communicate with the Remote Audio Mixer, the peripheral
port on the frame that the Audio Mixer is connected to must be set up to communicate with the
particular Remote Audio Mixer you have connected.
Use the following procedure to set up communication with an external audio mixer:
1. Navigate to the Communication Menu as follows:
• Press
MENU
to display the Main Menu on the Preview Overlay .
• Press
4. Communication
to display the Communication Menu .
Communication Menu — Audio
2. Select the peripheral port that is connected to the Audio Mixer as follows:
• Press 0. Port .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the
peripheral port that is connected to the audio mixer.
• Press the right SEL button to accept the new settings.
3. Assign a peripheral port to Audio as follows:
• Press 1. Type .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select Audio .
• Press the right SEL button to accept the new settings.
4. Select the device you want to assign to the Audio Mixer communications port as
follows:
• Press 2. Device .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the specific
Audio Mixer that is connected to the port. You can choose between the following:
~
Ya01V — Use this option to assign a Yamaha™ 01V audio mixer.
~ Ya01V96 — Use this option to assign a Yamaha 01V96 audio mixer.
~ YaDM1K — Use this option to assign a Yamaha DM1000 audio mixer.
• Press the right SEL button to accept the new settings.
Communication
0. Port
1. Type Periph2
Audio
MENU
Exit
100
Previous 10
Down
1
Up
SEL
Accept
2. Device
3. Baud
4. Parity Ya 01V
38400
Odd
5. Protocol
6. Input
RS232
None
7. Monitor
8. Option
9. Converter
Converter
MIDIator