manualshive.com logo in svg

Ross Synergy 100, Руководство по установке, Страница: 219 / 246

Поделиться
Скачать
Ross Synergy 100 Скачать руководство пользователя страница 219

Synergy 100 Installation Guide (v16.10-S100)

Appendix C. Diagnostics • 12–3

Fader Test

The 

Fader Test 

allows you to test the MLE fader on the panel. 

Use the following procedure to test the fader: 

1. Select the fader and move it from one limit to the other, and back to the original fader 

limit.

2. This action causes the following information to appear in the 3 four-character displays:

•

In  the 

Effects Control

 

Group

, 

Fadr 

appears in the display.

•

In  the 

Mattes

 

Group

, a range of numerical values appears in the display.

•

In  the 

System Control

 

Group

, 

Fadr

 appears in the display.

In addition, the LEDs in the 

Transition Progress Bar

 will illuminate.

3. Test the panel fader as required.

This completes the procedure to test the fader.

Positioner Test

The 

Positioner Test 

allows you to test all three axis of the positioner (joystick). 

Use the following procedure to test the positioner: 

1. Move the positioner from left to right or top limit to bottom limit to test the X- or Y-axis, 

or rotate it to test the Z-axis.

2. This action causes the following information to appear in the 3 four-character displays:

•

In  the 

Effects Control

 

Group

, 

Pos 

appears in the display.

•

In  the 

Mattes

 

Group

, a range of numerical values appears in the display.

•

In  the 

System Control

 

Group

, 

Pos

 and the letter 

X

, 

Y

, or 

Z

 appears in the display, 

depending on which axis you are testing.

In addition, the LEDs in the 

Transition Progress Bar

 will illuminate.

3. Test all axis of the positioner, as required.

This completes the procedure to test the positioner.

Button Test

The 

Button Test 

allows you to test all pushbuttons on the switcher panel. 

Use the following procedure to test the buttons: 

1. Press any pushbutton on the panel.

2. This action causes the following information to appear in the 3 four-character displays:

•

In  the 

Effects Control

 

Group

, 

Bttn 

appears in the display.

Note

Contact 

Technical Support 

for details on each display value

Note

Contact 

Technical Support 

for details on each display value

Содержание Synergy 100























































































































































































































































Отзывы:

Нет отзывов