Ross Synergy 100, Руководство по установке, Страница: 176 / 246

9–6 • Completing Setup Synergy 100 Installation Guide (v16.10-S100)
Saving Configurations
Once all of your switcher assignments and configurations have been completed, it is strongly
recommended that you save these important setups to a storage device, such as floppy disks or a USB
key. Because the Synergy 100 installation procedure covers such a wide variety of information, the
pertinent data spans two categories of registers —
Personality and Installation . As a result, both
categories should be saved to a backup storage device.
Typically, you will use this procedure in the following situations:
• To save a completely new switcher setup once complete
• To save incremental setups during a long installation process
• To save completely different switcher setups
Use the following procedure to save your setup configurations to a storage device:
1. Navigate to the Disk Menu as follows:
• Press MENU (to display the Main Menu ).
• Press 5. Disk (to display the Disk Menu ).
Disk Menu
2. Press 1. Store to display the Store Menu .
Store Menu
Note
You must have the USB Removable Media Drive option installed in
order to save your setups to a USB key.
Disk
0. Recall
1. Store
MENU
Exit
100
Previous 10
Down
1
Up
SEL
Accept
Store
0. Store All
1. Store Memories
MENU
Exit
100
Previous 10
Down
1
Up
SEL
Accept
2. Store Personality
3. Store Installation
4. Store 3D Wipes
5. Store Indiv 3D Wipe
6. Store All PreV12