Ross Synergy 100, Руководство по установке, Страница: 167 / 246

Synergy 100 Installation Guide (v16.10-S100) Additional Installation Setups • 8–33
Verifying Remote Aux Panel Crosspoints
Use the following procedure to verify that the proper crosspoints have been selected:
1. Go to each of the assignable or dedicated Aux panels (on which you have assigned
override crosspoints).
2. Manually select
BLACK
on the Aux bus panel.
3. Press each CCU Joystick button in succession and verify that the associated crosspoint
for that programmed BNC is selected — overriding
BLACK
. Verify that when you
release the Joystick button,
BLACK
is once again selected.
This completes the procedure to verify that the proper crosspoints have been selected.
Notes on Remote Aux Panel Setup
Please note the following important points regarding the use of the Override-type remote GPIs
connected to CCU Joystick buttons:
• The selected override crosspoint remains latched so long as the Joystick button is held
down. The panel returns to its previous “normal” assignment when the button is
released.
• If a second Joystick button is pressed while the first is being held, the second button’s
crosspoint will override the panel’s current selection. In this situation, if either Joystick
button is released, the panel returns to its previous “normal” assignment.
All GPI trigger types act as an override of the actual crosspoint selected, but can also be cancelled
(overridden) simply by pressing another crosspoint.