Ross Synergy 100, Руководство по установке, Страница: 18 / 246

1–2 • Introduction Synergy 100 Installation Guide (v16.10-S100)
About This Guide
This guide covers the installation of the Synergy 100 switcher. The following chapters are included:
• Chapter 1, “ Introduction ” summarizes the guide and provides important terms,
conventions and a system-wide comparison chart.
• Chapter 2, “ Installation ” provides instructions for installing Synergy 100 hardware and
software, and performing software upgrades.
• Chapter 3, “ Preliminary Cabling and Check ” outlines procedures for making basic
control panel, main frame, reference and monitor connections. A preliminary functional
check procedure is provided.
• Chapter 4, “ Preliminary Video Installation ” provides instructions for connecting video
and key signals to all areas of the switcher.
• Chapter 5, “ Using the Menu System ” provides an introduction to the menu system of
the Synergy 100.
• Chapter 6, “ BNC Configuration and Check ” provides instructions for configuring and
checking your BNC inputs.
• Chapter 7, “ Communication Setup ” provides instructions for setting up
communication parameters with an audio mixer, a serial tally interface, or external
editors.
• Chapter 8, “ Additional Installation Setups ” provides instructions for additional setup
procedures such as setting up outputs, clean feed, GPIs, and DSK Drop.
• Chapter 9, “ Completing Setup ” provides instructions for storing switcher
configurations to a storage device and resetting factory defaults.
• Appendix A, “ Specifications ” provides technical specifications and connector pinout
diagrams.
• Appendix B, “ Hardware Options ” provides instruction for installing a variety of
hardware options.
• Appendix C, “ Diagnostics ” provides information on the Synergy 100 panel diagnostics
tools.
• Appendix D, “ Switcher Installation Worksheets ” contains copies of the worksheets
described throughout this guide. Use these blank worksheets to plan and record your
switcher installation and wiring connections.
• The Glossary provides a reference list of important switching and video terms used
throughout this guide.
• An Index is also provided for your reference.
If, at any time, you have a question pertaining to the installation of your Ross Synergy 100 switcher,
please contact us at the numbers listed in the front of this guide. Our technical staff are always
available for consultation, training or service.
Note
Refer to the Synergy 100 Operation Guide for a comprehensive
outline of product highlights, plus a complete overview of standard
and optional system features.