Ross Synergy 100, Руководство по установке, Страница: 85 / 246

Synergy 100 Installation Guide (v16.10-S100) Using the Menu System • 5–3
3. Effects Control Group
Once you have entered the menu system, you can go directly to any menu, sub menu or
heading, by pressing its number in the
Effects Control Group . As well, when in a
particular menu, if you press another Effects Control button after you have set a value,
it will automatically save the value and jump directly to the new menu heading.
4.
MENU
Button
The Preview Overlay menus are entered and exited by pressing the
MENU
button.
5.
BACK (100)
Button
Pressing the
BACK (100)
button will return you to the previous menu or position in the
menu tree.
6.
DOWN (10)
Button
Pressing the
DOWN ARROW (10)
button will send you
DOWN
to the next menu
heading.
7.
UP (1)
Button
Pressing the
UP ARROW (1)
button will send you back
UP
to the previous menu
heading.
8.
SEL
Button
Pressing the
SEL
button will
SELECT / ACCEPT
your option, set-up, or position in
the menu tree.
9. Display
Located within the display, you will find three individual four-character displays (under
the heading “
MODE
”) which identify the area of the panel that has control of the
Effects Control , Mattes , or System Control functions. When you are in the menu
system, MENU will appear in the displays in the Effects Control and System Control
groups.
Note In this guide, display functions are referred to by their actual label
names and not by the button that is pressed. For example, the phrase
“... press
5. Disk ...” will be used rather than “... press button #5 in
the Effects Control Group ...”