manualshive.com logo in svg

Ross Synergy 100, Руководство по установке, Страница: 2 / 246

Поделиться
Скачать
Ross Synergy 100 Скачать руководство пользователя страница 2

Synergy 100 •  Installation Guide

•

Ross Part Number: 

4100D-002

•

Document Issue: 

16A

•

Release Date: May 30, 2006. Printed in Canada.

•

Software Issue: 

16.10-S100

The information contained in this Installation Guide is subject to change without notice or obligation.

Copyright 

© 2006 Ross Video Limited

. All rights reserved.

Contents of this publication may not be reproduced in any form without the written permission of 
Ross Video Limited. Reproduction or reverse engineering of copyrighted software is prohibited. 

Notice

The material in this manual is furnished for informational use only. It is subject to change without 
notice and should not be construed as commitment by Ross Video Limited. Ross Video Limited 
assumes no responsibility or liability for errors or inaccuracies that may appear in this manual.

Trademarks

•

 is a registered trademark of Ross Video Limited.

•

Ross, ROSS, ROSS

, and MLE are registered trademarks of Ross Video Limited.

•

All other product names and any registered and unregistered trademarks mentioned in 
this guide are used for identification purposes only and remain the exclusive property of 
their respective owners.

Содержание Synergy 100























































































































































































































































Отзывы:

Нет отзывов