Ross Synergy 100, Руководство по установке, Страница: 122 / 246

7–22 • Communication Setup Synergy 100 Installation Guide (v16.10-S100)
2. Press
0. Inputs
to display the Inputs Sub-Menu
Inputs Sub-Menu
3. Select the input BNC you want to assign an alpha to as follows:
• Press 0. Input .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the input
BNC that you want to assign the audio channels or groups to.
• Press the right SEL button to accept the new settings.
4. Assign an audio channel or group to the selected input BNC as follows:
• Press 5. Aud Chan1 .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the audio
channel or group you want to assign to the selected input BNC. You can select
between the following:
~
NONE — Use this option when no audio channel is connected.
~ Chan 1 to Chan 16 — Use this option when a single mixer channel is
connected.
~ Group 1 to Group 6 — Use this option when a group of channels is
connected. These groups are set up in the next section.
• Press the right SEL button to accept the new settings.
This completes the procedure to assign audio channels or groups to an input BNC.
Operating
Tip
You can assign a second audio channel or group to the selected input
BNC by assigning it to
6. Aud Chan2 .
Inputs
0. Input
1. Type BNC 1
Off
2. AutoKey
3. Reserved
4. Shaped Black
No
5. Aud Chan1
6. Aud Chan2
MENU
Exit 100
Previous SEL
Accept 10
Down
1
Up
Chan 1
Chan 2