Ross Synergy 100, Руководство по установке, Страница: 20 / 246

1–4 • Introduction Synergy 100 Installation Guide (v16.10-S100)
Documentation Terms
The following terms are used throughout this guide:
• A “ 1+1 DVE ” has both a video (fill) and an key (alpha) connection from Synergy to the
DVE. Both key and fill signals are connected from the DVE to Synergy.
• “Crosspoint” is synonymous with “Button” . Both refer to the switcher crosspoints or
buttons on the Synergy 100 control panel.
• “ DVE ” refers to the DVE (either single or multi-channel) that is connected to a Synergy
100 switcher via RS-422 serial control.
• “Input #” refers to the “BNC input #” on the rear of the Synergy 1 frame and vice
versa.
• “ Frame ” and “ Electronics Frame ” both refer to the Synergy switcher’s electronics
frame.
• “ Operator ” and “ User ” refer to the person who uses the Synergy 100 production
switcher.
• “ Panel ” and “ Control Panel ” both refer to the Synergy switcher’s large multi-button
control panel.
• “ SDI ” refers to Serial Digital Interface, a digital video signal that is distributed via a
single coaxial cable with BNC connectors.
• “ Storage device ” refers to a standard 1.44 MB high-density floppy disk or a USB key.
Either type of storage device can be used to save and recall configurations, setups and
certain files to the Synergy switcher.
• “ System ” refers to the entire Synergy 100 system, consisting of its electronics frame and
control panel.
• “ Video system ” refers to the mix of interconnected digital equipment (including the edit
controller, VTRs, DVEs, etc.) in which the Synergy 100 system is included.