Ross Synergy 100, Руководство по установке, Страница: 143 / 246

Synergy 100 Installation Guide (v16.10-S100) Additional Installation Setups • 8–9
Ancillary Data Menu with Additional Lines Stripped
Adjustment of the “Image starts at” line prevents any switcher effects (e.g., keys,
wipes, etc.) from modifying lines prior to the selected line. This is useful for
protecting information such as closed-captioning, which may reside beyond the
normal blanking area.
6. Press MENU to display the Installation Change Screen .
7. Accept or cancel these changes as follows:
• Press 0. Confirm to accept the changes.
• Press 1. Cancel to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure to adjust the ancillary data parameters.
The following sections describe the procedures to follow when programming your Remote Aux
Panels.
Setting Up Remote Aux Panels
For all assignable and dedicated Remote Aux Panels, this procedure allows you to set up the Aux Bus
output that a specific Remote Aux Panel controls, and to program the access “rights” for each Aux
Bus output.
With the programming mode in effect, selected buttons, or crosspoints, on each panel now represent
the Aux Bus outputs. These buttons differ depending on the type of remote
Aux Panel (assignable or
dedicated).
Using the Synergy 100 Assignable Remote Aux Panel , the Aux Assign buttons represent the 8
Synergy 100 Aux Bus outputs, respectively. Refer to the figure on page 8-9.
Aux Panel Button Assignments when in Programming Mode — Synergy 100 Panel
Note
Since Aux Buses 1 and 2 are not implemented, setting “rights” for Aux
1 and 2 (Assign 1 and Assign 2 buttons) is irrelevant.
Ancillary data
0. Field (line)
1. Mode odd ( 1)
Pass
2. Image starts at
odd ( 26)
even (264)
Strip
even (289)
SSSSS SSSSF SSSSS SSSS PSS S
5 10 15 20 25 HB
268 273 278 283 288
MENU
Exit 100
Previous SEL
Accept 10
Down 1
Up
2 3 4 5 6 7 8
MLE
PV
CLEAN
FEED
PGM
ASSIGN
10
ASSIGN
9
ASSIGN
8
ASSIGN
7
ASSIGN
6
ASSIGN
5
ASSIGN
4
ASSIGN
3
ASSIGN
2
ASSIGN
1
SHIFT
10
9
BLACK
1
Aux Bus Assign Group
(Assignable Panels Only) Tally
(Aux Bus "Active")
DVE
SEND