Ross Synergy 100, Руководство по установке, Страница: 92 / 246

6–4 • BNC Configuration and Check Synergy 100 Installation Guide (v16.10-S100)
2. Press
0. Inputs
to display the Inputs Sub-Menu .
Inputs Sub-Menu
3. Select the Input BNC you want to set up as follows:
• Press 0. Input .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the input
BNC you want to set up.
• Press the right SEL button to accept the new settings.
4. Select the input type you want to assign to the selected input BNC as follows:
• Press 1. Type .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the input
type. You can select between the following:
~
OFF — Use this option when there is no input physically connected to the
associated BNC.
~ Other — Use this option for devices such as cameras, routing switcher feeds,
the fill portion of still stores or DVEs and other devices that provide both FILL
and KEY sources.
~ Alpha — Use this option when an alpha signal (also known as a “key” signal)
is connected to the frame. Devices such as DVEs, character generators,
graphics (paint) systems, and still stores typically provide unique alpha signals.
• Press the right SEL to accept the new settings.
5. Press MENU to display the Installation Change Screen .
6. Accept or cancel these changes as follows:
• Press 0. Confirm to accept the changes.
• Press 1. Cancel to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure for setting up the BNC Types.
Inputs
0. Input
1. Type BNC 1
Off
2. AutoKey
3. Reserved
4. Shaped Black
No
5. Aud Chan1
6. Aud Chan2
MENU
Exit 100
Previous SEL
Accept 10
Down
1
Up
Chan 1
Chan 2