Ross Synergy 100, Руководство по установке, Страница: 152 / 246

8–18 • Additional Installation Setups Synergy 100 Installation Guide (v16.10-S100)
Menu Button Setup
The Menu Bttn setting allows you to dictate the behavior of the
MENU
button when the Editor
option is installed. It provides a quick and easy method of enabling the Editor without having to
access the
Effects Menu .
Use the following procedure to program the
MENU
button on the Synergy 100 control panel:
1. Navigate to the Personality Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
6. Personality
to display the Personality Menu .
Personality Menu
2. Program the
MENU
button as follows:
• Press
3. Menu Bttn
.
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select
~
Menu – Edit
— Use this option to have a single press of the
MENU
button
display the menu, and a double-press to enable or disable the Editor .
~
Edit – Menu
— Use this option have a single press of the
MENU
button to
enable or disable the Editor , and a double-press to display the menu.
~
Menu Only
— Use this option to have the
MENU
button strictly for accessing
the menu system, and not to enable the Editor.
~
Menu Bttn
— Use this option to have the
MENU
button used only for
accessing the menu system.
• Press the right
SEL
button to accept the new settings.
3. Press MENU to display the Installation Change Screen .
4. Accept or cancel these changes as follows:
• Press 0. Confirm to accept the changes.
• Press 1. Cancel to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure to program the MENU button on the Synergy 100 control panel.
Note
If the Editor option is enabled, the secret-til-lit LED under the MENU
button will be lit.
Personality - Synergy 100
0. Trans PV
1. DSK Drop On
Manual
MENU
Exit 100
Previous SEL
Accept 10
Down
1
Up
2. SleepTime 10 min
3. Menu Bttn Menu Only
4. AutoRcall On
5. GPIO Mode Disabled
6. Show Knob 0
7. Audio Cut
On