Ross Synergy 100, Руководство по установке, Страница: 3 / 246

Important Regulatory and Safety Notices to Service
Personnel
Before using this product and any associated equipment, refer to the “ Important Safety
Instructions ” listed below to avoid personnel injury and to prevent product damage.
Product may require specific equipment, and/or installation procedures to be carried out to satisfy
certain regulatory compliance requirements. Notices have been included in this publication to call
attention to these specific requirements.
Symbol Meanings
Important Safety Instructions
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
Protective Earth
This symbol identifies a Protective Earth (PE) terminal, which is
provided for connection of the supply system’s protective earth (green
or green/yellow) conductor.
This symbol on the equipment refers you to important operating and
maintenance (servicing) instructions within the Product Manual
Documentation. Failure to heed this information may present a major
risk of damage or injury to persons or equipment
Warning
The symbol with the word “Warning” within the equipment manual
indicates a potentially hazardous situation, which if not avoided, could
result in death or serious injury.
Caution
The symbol with the word “ Caution ” within the equipment manual
indicates a potentially hazardous situation, which if not avoided, may
result in minor or moderate injury. It may also be used to alert against
unsafe practices.
Notice
The symbol with the word “ Notice ” within the equipment manual
indicates a situation, which if not avoided, may result in major or
minor equipment damage or a situation, which could place the
equipment in a non-compliant operating state.
Warning Hazardous
Voltage
This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product enclosure that may be of
sufficient magnitude to constitute a risk of shock to persons.
ESD Susceptibility
This symbol is used to alert the user that an electrical or electronic
device or assembly is susceptible to damage from an ESD event.
Warning
1) Read these instructions.
2) Keep these instructions.