Ross Synergy 100 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 246

Ross Synergy 100 Скачать руководство пользователя страница 43

Synergy 100 Installation Guide (v16.10-S100)

Installation • 2–9

4.

Synergy 100 Panel Connector

One 8-pin shielded telco connector labeled

SYNERGY PANEL

is provided for

communications between the frame and the Synergy 100 control panel.

5.

Aux Panel Connector

One 6-pin shielded Telco connector labeled

AUX

PANEL

is provided for

communications between the frame and remote Aux panels.

6.

Ross 210/216 Panel Connector

One 50-pin connector labeled

210/216 PANEL

is provided for communications

between the frame and the Ross RVS 210 or Ross RVS 216 control panel.

7.

GVG 100/110 Panel Connector

One 15-pin “D” connector labeled

100/110 PANEL

is provided for communications

between the frame and the GVG 100 or GVG 110 control panel.

8.

GPI Input/Output Connector

One 25-pin “D” connector labeled

GPI I/O

is provided for GPI input and output ports.

Please note:

•

As standard, the connector provides one common ground, 12 GPI outputs and 12
GPI inputs.

9.

Tally Connectors

Two 12-pin connectors labeled

TALLY

are provided for a total of 16 optional tally

relays.

10.

Editor Connector

One 9-pin “D” RS-422 connector labeled

EDITOR

is provided for connection to a

external edit controller. The connection allows the Synergy 100 to be controlled by the
editor using RS-422 commands.

•

The port can be configured as RS-422 or RS-232 through the menu system.

11.

DVE Connector

One 9-pin “D” RS-422 connector labeled

DVE

is provided.

12.

Peripheral 1 Connectors

The

PERIPHERAL 1

group includes three connectors:

•

One 9-pin “D” RS-422 connector is provided for connection to a primary peripheral
device. The connection is for control purposes. The port can be configured for
additional serial control purposes through the menu system.

Important

The cable for connecting the Synergy Control Panel to the Synergy
Frame is not wired as a standard CAT5 ethernet cable. If you need a
cable of a specific length, contact your Ross Video Representative for
ordering information.

Note

The

DVE

connector is

not

currently implemented for the Synergy 100.

«
...
41
42
43
44
45
...
»

Содержание Synergy 100























































































































































































































































Отзывы:

Нет отзывов