Ross Synergy 100, Руководство по установке, Страница: 141 / 246

Synergy 100 Installation Guide (v16.10-S100) Additional Installation Setups • 8–7
• Press
0. Confirm
to accept the changes.
• Press
1. Cancel
to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure to set the Clean Feed output.
Ancillary Data Setup
The Ancillary Data Menu allows you to select lines in the vertical/horizontal blanking area of the
video stream, which can then be stripped or passed. This menu is useful in situations, for example, in
which you want to pass embedded audio or closed captioning. Refer to the following figure for a
visual description of vertical/horizontal blanking.
Vertical/Horizontal Blanking Area
Use the following procedure to adjust the ancillary data parameters:
1. Navigate to the Outputs Menu as follows:
• Press MENU to display the Main Menu on the Preview Overlay .
• Press 2. Outputs to display the Outputs Menu .
Outputs Menu
Important
Contact Ross Technical Support for additional assistance with the
Ancillary Data Menu .
Note
To enable the video stream to be passed through the horizontal area
located within the vertical blanking (the shaded area), both the
horizontal blanking and the vertical line must be set to
Pass .
Vertical Blanking
Image Starts
Image Area
Horizontal Blanking
Line 0 (even)
263 (odd)
Line 20 (even)
283 (odd)
Line 262 (even)
525 (odd)
Outputs
0. Aspect
1. Ref Dly 4:3
300
MENU
Exit 100
Previous SEL
Accept
10
Down
1
Up
2. Clean BeforeKeys
3. Ancillary data
4. RemAuxPrg Off
5. Fld Dom Field1