Ross Synergy 100, Руководство по установке, Страница: 29 / 246

Synergy 100 Installation Guide (v16.10-S100) Introduction • 1–13
• Preprocessor effects include defocus, mosaic, posterization, colorization, and strobe
effects.
• Advanced picture frame borders can be the simple, single color type, or a fancy picture
frame, including Roman column, tubular, beveled, computer style, tri-color, and more.
• All images can have natural lighting effects applied using a positionable light source
with ambient light min/max controls.
Operationally, Squeeze & Tease is exceptionally easy to control. Most effects can be produced simply
by pressing the
FLY KEY
button in the Effects Keyer group and using the 3-axis joystick and
associated end stop knobs. Additional adjustment can be made through the menu system. Please note:
• Both Squeeze & Tease options comprise software plus “daughter boards” that install on
the Frame Processor Board.
Tally Outputs
There are 16 optional frame tally relays available. Any tally can be assigned to any video input or the
program output. Note that the
Tallies option comprises the hardware relays that install in the switcher
frame.
Floating Border Generator
The Floating Border Generator option provides visually dynamic border, shadow, and outline
effects to the Downstream Keyer group, with either hard or “soft” edges. You can move the border to
any position on the screen — even above the key.
Borders are “flown” in real time with the joystick (just like wipe patterns and DVE effects). Please
note:
• All border edge effects can be modified through the parameters of
X
and
Y
position,
border size, border color, density, and glow (giving a soft defocused look).
• The Floating Border Generator option comprises software plus a “daughter board”
that installs on the Frame Processor Board.
Editor Interface
The Editor Interface Option allows the Synergy 100 to interface with all popular editing systems.
The option itself comprises software plus security codes and once installed, the switcher can be
controlled using an RS-232 or RS-422 interface and industry standard editor protocol. The editor can
be used to read and write switcher functions including video input selection, pushbutton enable and
disable, control settings, and memory registers. If GPI control is not sufficient and control of all
switcher parameters from an editor is necessary, this option is required.
Remote Audio Mixer Control Interface
The Remote Audio Mixer Control Interface Option enables serial control from the Synergy 100
over an audio mixer for enhanced audio-follow-video, making an integrated A/V production possible.
This protocol supports the association of any audio input with any video input, as well as easy audio
voice-over and level control directly from the Synergy 100 control panel.
Serial Tally Interface
The Serial Tally Protocol Option allows you to set up communication parameters with tally system
interface equipment using industry standard protocol. Note that the standard parallel tally interface
will continue to operate normally when this option is enabled.