Ross Synergy 100, Руководство по установке, Страница: 200 / 246

10–14 • Appendix A. Specifications Synergy 100 Installation Guide (v16.10-S100)
Control Panel Pinouts
This section provides pinouts for the following control panel connectors:
• 100/110
• ANALOG
• SYNERGY
• TALLY 1, TALLY 2 Connectors
100/110 Connector Pinouts
The following table lists pinouts for the 100/110 connector.
• Connector type: 15-pin, “D” SUB Female
Male on Frame Female on Cable
GVG 100/110 PANEL Connector Pinouts
Pin # Function Pin # Function
1 GND / P.S. Return 9
Xmit Data -
2 GND / P.S. Return 10
Xmit Data +
3 GND / P.S. Return 11
Xmit Data Shield – Drain
4 Lamp +14V 12 RCV Data Shield – Drain
5 Lamp +14V 13 RCV Data +
6 Panel +9V 14 RCV Data -
7 +14V Sense - 15 +14V Sense +
8 Outer Shield - Drain
Note
If you have Iss. 2 of the Interface Card, Part # 4100A-039 , in your
control panel, the
100/110
connector is female. Therefore, you will
require a plug-to-plug adapter if you wish to use this connector for
panel-to-frame communication.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15