Ross Synergy 100, Руководство по установке, Страница: 183 / 246

Synergy 100 Installation Guide (v16.10-S100) Completing Setup • 9–13
Restoring Factory Default Settings
This section provides instructions for resetting the switcher to factory default values. These values are
preset at the factory and can not be overwritten by the user.
From time to time, you may want to reset your switcher to the factory defaults. This could occur in the
following situations:
• If you feel the need to restart the setup or configurations from a base default setting.
• If you wish to reset all control panel values.
Recall Factory Procedure
Use the following procedure to restore factory default values:
1. Navigate to the Default Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
9. Default
to display the Default Menu .
Default Menu
2. Press 0. All to display the Reset Factory Defaults Confirmation Screen .
Reset Factory Defaults Confirmation Screen
Important The Default Menu enables you to reset the Synergy 100 panel and the
frame. All register and panel settings will be lost and reset to the
factory defaults.
Default
0. All
MENU
Exit
100
Previous
10
Down
1
Up
SEL
Accept
WARNING!
This function will reset the switcher to its
Factory Defaults.
Are you certain you wish to do
this?
10
Down 1
Up SEL
Accept
0. Confirm
1. Cancel