Ross Synergy 100, Руководство по установке, Страница: 6 / 246

EUROPE
This equipment is in compliance with the essential requirements and other relevant provisions of CE
Directive 93/68/EEC .
INTERNATIONAL
This equipment has been tested to CISPR 22:1997 along with amendments A1:2000 and A2:2002 ,
and found to comply with the limits for a Class A Digital device.
General Handling Guidelines
• Careful handling, using proper ESD precautions, must be observed.
• Power down the system before PCB removal.
A Word About Static Discharge
Throughout the many procedures in this guide, please observe all static discharge precautions.
Notice This is a Class A product. In domestic environments, this product may
cause radio interference, in which case the user may have to take
adequate measures.
Notice Avoid handling the switcher circuit boards in high static environments
such as carpeted areas, and when synthetic fiber clothing is worn.
Touch the frame to dissipate static charge before removing boards
from the frame, and exercise proper grounding precautions when
working on circuit boards.