manualshive.com logo in svg

Ross Synergy 100, Руководство по установке, Страница: 33 / 246

Поделиться
Скачать
Ross Synergy 100 Скачать руководство пользователя страница 33

Synergy 100 Installation Guide (v16.10-S100)

Introduction • 1–17

Product Comparison Charts

For your reference, following are detailed charts that compare the features and options that are 
available with the Synergy 1’s different control panel configurations.

Feature Comparison Chart

Notes:

(*1) Panel supports 

SHIFT 

button.

(*2) The hidden (inaccessible) inputs can be configured as key signals.
(*3) 2 keyers are standard and 2 external DSKs are optional.
(*4) The Encoded Chroma Key button becomes the MLE Key 2 button. In this mode, 

external DVE Sends are not available. The DSK “next transition” button becomes the 
MLE Key 2 button and the DSK is then controlled by dedicated buttons (for CUT, 
AUTO TRANS).

(*5) In 2 Keyer mode only. Timed Aux Bus option must be installed.
(*6) DSKs on Synergy 1 are optional and external. They only have Self and Auto Select key 

capability.

(*7) DSK can only perform Mix (dissolve) and Cut transitions.
(*8) Variable via Chroma Key button hold down.
(*9) Fixed settings.
(*10)Bank selectable via the Auto Trans (System Control) display.
(*11)Centre mark and safe title only.

Feature

Synergy 

100

Synergy 1

GVG 

110/100

Ross 

210A/D

Ross 

216A/D

100 Event Memory

Yes (*10)

Yes

Yes (*10)

Yes (*10)

Yes (*10)

Number of Keyers

3

4 (3)

2

2

3 (*4)

All 16 Inputs Accessible

Yes (*1)

Yes

Yes (*1)

No (*2)

Yes

Chroma Key Clip, Gain and Hue controls 

Yes

Yes

Yes

Yes

Yes

Chroma Key Reject, Blue spill suppression controls  Yes

Yes

Yes (*8)

No (*9)

No (*9)

Custom Control (Macros)

No

Yes

No

No

No

DSK Borders

Yes

No (*6)

Yes

Yes

Yes

DSK DVE Send Transitions

No (*7)

No (*6)

No (*7)

Yes

Yes

DSK Still Store and Animated Logo Generator

No

Yes (*6)

No

No

No

DVE Send

No

Yes

Yes

Yes

Yes (*5)

Extended Wipe Patterns

Yes

Yes

Yes

Yes

Yes

Favorite CG Button

Yes

Yes

No

Yes

Yes

Internally Generated Black

Yes

Yes

Yes

Yes

Yes

Internally Generated Color

Yes

Yes

Yes

Yes

Yes

Key 1 Borders

No

Yes

No

No

No

Key 1 Squeeze and Tease

Yes

Yes

Yes

Yes

Yes

Non-Sync LEDs

Yes

Yes

No

Yes

Yes

Preview Overlay

Yes (*11)

Yes

Yes (*11)

Yes (*11)

Yes (*11)

Remote Aux Panel GPIs

Yes

Yes

No

No

No

Software Reset from Panel

Yes

Yes

No

No

No

Transition Preview

Yes

Yes

No

Yes

Yes

Содержание Synergy 100























































































































































































































































Отзывы:

Нет отзывов