Ross Synergy 100, Руководство по установке, Страница: 204 / 246

10–18 • Appendix A. Specifications Synergy 100 Installation Guide (v16.10-S100)
* Copy this page for each Remote Panel. Fill in the intended function (in the Function
column) and fill in the Programmed Group number in the space provided. Store each
sheet in a safe place for reference.
Aux Panel J1 Connector Pinouts
The table below lists pinouts for the Remote Aux Panel J1 connector.
• Connector type: 6-pin RJ-12 Telco Jack, Shielded
• Format: RS-422 Data Link from Remote Aux Panel to Panel
Remote Aux Panel GPI Connector Pinouts
Pin # Function * GPI Pin # Function * GPI
1 Input 1 6 Input 6
2 Input 2 7 Input 7
3 Input 3 8 Input 8
4 Input 4 9 n/a Ground
(common)
5 Input 5
Programmed Group #
Caution
GPI inputs are only intended for connection to “dry contact”, open
collector type transistor outputs or 5 VDC signals. Application of any
negative voltages or voltages in excess of 5 VDC may permanently
damage the GPI inputs.
Male on Cable Female on Remote Aux Panel
Aux Panel J1 Connector Pinouts
Pin # Function Pin # Function
1 RxA (Rx-) 4 TxB (Tx+)
2 RxB (Rx+) 5 RESET (Out)
3 TxA (Tx-) 6 Ground
6 5 4 3 2 1
1 2 3 4 5 6