Ross Synergy 100, Руководство по установке, Страница: 81 / 246

Synergy 100 Installation Guide (v16.10-S100) Preliminary Video Installation • 4–7
Output Connection
Complete the following primary output worksheet. Use the following figure for reference.
Synergy 1 Frame, Rear – Output Section
• Fill in the desired destination for each output signal.
• To avoid marking up the Installation Guide , use the blank worksheet provided in the
section “ Output Worksheet ” on page 13–3 to make extra copies.
Primary Output Worksheet
Output
Connector
Synergy 100
Destination
PGM 1
PGM 2
PV 1
PV 2
AUX 1
(Not yet implemented)
AUX 2
(Not yet implemented)
AUX 3
AUX 4
AUX 5
AUX 6
AUX 7
AUX 8
AUX 9
AUX 10
CLEAN
(Optional)
Note If you require more outputs than are provided, consideration should be
given to using a digital distribution amplifier. Contact Ross Video or
your Ross Video dealer for full details.
OUT
Aux 9
Aux 8
Aux 5
Aux 2 PV2
601 REF IN
Aux 10
Aux 7
Aux 4
Aux 1 PV1
PGM2 Aux 6
Aux 3
Clean
PGM1