LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 597 / 698

Appendix E: Resetting to Factory Defaults
585
Note: PuTTY is a free program you can download from the Internet. See
PuTTY's documentation for details on configuration.
Using the CLI Command
The Command Line Interface (CLI) provides a reset command for
restoring the SRC to factory defaults. For information on CLI, see
Using
the Command Line Interface
(on page 374).
To reset to factory defaults after logging in to the CLI:
1. Connect to the SRC. See
Logging in to CLI
(on page 375) or
Connecting the SRC to a Computer
(on page 21).
2. Launch a terminal emulation program such as HyperTerminal,
Kermit, or PuTTY, and open a window on the SRC. For information on
the serial port configuration, see Step 2 of
Initial Network
Configuration via CLI (on page 657).
3. Log in to the CLI by typing the user name "admin" and its password.
4. After the # system prompt appears, type either of the following
commands and press Enter.
# reset factorydefaults
-- OR --
# reset factorydefaults /y
5. If you entered the command without "
/y
" in Step 4, a message
appears prompting you to confirm the operation. Type y to confirm
the reset.
6. Wait until the reset is complete.
To reset to factory defaults without logging in to the CLI:
The SRC provides an easier way to reset the product to factory defaults
in the CLI prior to login.
1. Connect to the SRC and launch a terminal emulation program as
described in the above procedure.
2. At the Username prompt in the CLI, type "factorydefaults" and press
Enter.
Username: factorydefaults
3. Type
y
on a confirmation message to perform the reset.