LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 269 / 698

Chapter 6: Using the Web Interface
257
Action Group
You can create an action group that performs up to 32 actions. After
creating such an action group, you can easily assign this set of actions to
any event rule rather than selecting all needed actions one by one per
rule.
If the needed action is not available yet, create it first. See
Available
Actions
(on page 253).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select 'Execute an action group' from the Action list.
3. To select any action(s), select them one by one from the 'Available
actions' list.

To select all available actions, click Select All.
4. To remove any action(s) from the 'Selected actions' field, click that
action's .

To remove all actions, click Deselect All.
External Beeper
If an external beeper is connected to the SRC, the SRC can change the
beeper's behavior or status to respond to a certain event.
To control the connected external beeper:
1. Choose Device Settings > Event Rules > .
2. Select 'External beeper' from the Action list.
3. In the 'Beeper port' field, select the port where the external beeper
is connected. This port is the FEATURE port.
4. In the 'Beeper action' field, select an action for the external beeper
to carry out.

Alarm: Causes the external beeper to sound an alarm cycle every
20 seconds - stays on for 0.7 seconds and then off for 19.3
seconds.

On: Turns on the external beeper so that it buzzes continuously.

Off: Turns off the external beeper so that it stops buzzing.