LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 678 / 698

Appendix I: Additional SRC Information
666
To verify network settings:
After exiting the above configuration mode and the # prompt re-appears,
type this command to verify all network settings.

show network
The IP address configured may take seconds to take effect.
Device-Specific Settings
A bulk configuration file will NOT contain any device-specific information
like the following list.
For further information, simply open the built-in bulk profile for a
detailed list of 'excluded' settings.

Device name

SNMP system name, contact and location

Part of network settings (IP address, gateway, netmask and so on)

Device logs

Names, states and values of environmental sensors and actuators

TLS certificate

Server monitoring entries

Asset strip names and rack unit names
TLS Certificate Chain
A TLS server sends out a certificate to any client attempting to connect to
it. The receiver determines whether a TLS server can be trusted by
verifying that server's certificate, using the certificate (chain) stored on
the receiver.
Therefore, to successfully connect to a TLS server, you must upload a
valid certificate or (partial) certificate chain to the receiver.
The uploaded certificate (chain) must contain all missing certificates
"related to" that TLS server's certificate in some way. Otherwise, the
connection made to that TLS server will fail.

For information on how the uploaded certificate (chain) is related to
a TLS server's certificate, see
What is a Certificate Chain
(on page
666).

For an example of creating and uploading a TLS certificate to SRC,
see
Illustration - GMAIL SMTP Certificate Chain (on page 669).