LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 419 / 698

Chapter 8: Using the Command Line Interface
407
Setting the Z Coordinate Format for Environmental Sensors
This command enables or disables the use of rack units for specifying
the height (Z coordinate) of environmental sensors.
config:# src externalSensorsZCoordinateFormat <option>
Variables:

<option> is one of the options: rackUnits or freeForm.
Option Description
rackUnits The height of the Z coordinate is measured in
standard rack units.
When this is selected, you can type a numeric
value in the rack unit to describe the Z coordinate
of any environmental sensors or actuators.
freeForm Any alphanumeric string can be used for
specifying the Z coordinate.
Note: After determining the format for the Z coordinate, you can set a
value for it. See
Setting the Z Coordinate (on page 496).
Network Configuration Commands
A network configuration command begins with
network. A number of
network settings can be changed through the CLI, such as the IP address,
transmission speed, duplex mode, and so on.
Configuring IPv4 Parameters
An IPv4 configuration command begins with network ipv4.