LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 508 / 698

Chapter 8: Using the Command Line Interface
496
Specifying the CC Sensor Type
Raritan's contact closure sensor supports the connection of diverse
third-party. You must specify the type of connected detector/switch for
proper operation. Use this command when you need to specify the
sensor type.
config:# externalsensor <n> sensorSubType <sensor_type>
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the SRC web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer starting at 1.

<sensor_type> is one of these types: contact, smokeDetection,
waterDetection or vibration.
Type Description
contact The connected detector/switch is for detection of
door lock or door closed/open status.
smokeDetection The connected detector/switch is for detection of
the smoke presence.
waterDetection The connected detector/switch is for detection of
the water presence.
vibration The connected detector/switch is for detection of
the vibration.
Setting the X Coordinate
This command specifies the X coordinate of an environmental sensor.
config:# externalsensor <n> xlabel "<coordinate>"
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the SRC web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer starting at 1.

<coordinate> is a string comprising up to 24 ASCII printable
characters, and it must be enclosed in quotes.