LEGRAND Raritan SRC-0100, Руководство пользователя, Страница: 132 / 698

Chapter 6: Using the Web Interface
120
Field Function Note

The default is to enable it.
Altitude Specifies the altitude of SRC above
sea level when a Raritan's differential
air pressure sensor is attached.

Range: -425 to 3000 meters (-1394
to 9842 feet)

Note that it can be a negative value
down to -425 meters (-1394 feet)
because some locations are below
the sea level.

The device's altitude is associated
with the altitude correction factor.
See
Altitude Correction Factors
(on page 650).

The default altitude measurement
unit is meter. See
Setting Default
Measurement Units
(on page
166).

You can have the measurement
unit vary between meter and foot
according to user credentials. See
Setting Your Preferred
Measurement Units
(on page
165).
Active powered
dry contact limit Determines the maximum number of
"active" powered dry contact
actuators that is permitted
concurrently.

Range: 0 to 24

Default: 1

An "active" actuator is the one that
is turned ON, or, if with a door
handle connected, is OPENED.

This setting only applies to
"powered dry contact" (PD)
actuators rather than normal "dry
contact" actuators.

You need either 'Change
Peripheral Device Configuration'
privilege or 'Administrator
Privileges' to change its upper
limit.

To turn on/off the connected
actuators, see
Peripherals
(on
page 115).
3. Click Save.
4. To return to the sensor list on the Peripheral Devices page, click
"Peripheral Devices" on the top.