LEGRAND Raritan SRC-0100, Руководство пользователя, Страница: 145 / 698

Chapter 6: Using the Web Interface
133
To set up a sensor's or actuator's physical location and
additional settings:
1. Click Edit Settings.
2. Make changes to available fields, and then click Save.
Fields Description
Name A name for the sensor or actuator.
Description Any descriptive text you want.
Location (X, Y
and Z) Describe the sensor's or actuator's location in the data center by typing
alphanumeric values for the X, Y and Z coordinates. See
Sensor/Actuator
Location Example
(on page 137).
If the term "Rack Units" appears in parentheses in the Z location, you must type
an integer number. The Z coordinate's format is determined on the page of
Peripherals
(on page 115).
Alarmed to
Normal Delay
This field is available for the DX-PIR presence detector only.
It determines the wait time before the SRC announces that the presence
detector is back to normal after it already returns to normal.
Adjust the value in seconds.
Binary Sensor
Subtype
This field is available for any Raritan contact closure sensor except for
DX2-DH2C2's contact closure sensors.
Determine the sensor type of your contact closure detector.

Contact Closure detects the door lock or door open/closed status.

Smoke Detection detects the appearance of smoke.

Water Detection detects the appearance of water on the floor.

Vibration detects the vibration of the floor.