LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 448 / 698

Chapter 8: Using the Command Line Interface
436
Changing the SSH Port
This command changes the SSH port.
config:# network services ssh port <n>
Variables:

<n> is a TCP port number between 1 and 65535. The default SSH port
is 22.
Determining the SSH Authentication Method
This command syntax determines the SSH authentication method.
config:# network services ssh authentication <auth_method>
Variables:

<option> is one of the options: passwordOnly, publicKeyOnly or
passwordOrPublicKey.
Option Description
passwordOnly Enables the password-based login only.
publicKeyOnly Enables the public key-based login only.
passwordOrPublicKey Enables both the password- and public
key-based login. This is the default.
If the public key authentication is selected, you must enter a valid SSH
public key for each user profile to log in over the SSH connection. See
Specifying the SSH Public Key
(on page 473).
Setting the SNMP Configuration
You can enable or disable the SNMP v1/v2c or v3 agent, configure the
read and write community strings, or set the MIB-II parameters, such as
sysContact, using the CLI commands.
An SNMP command begins with network services snmp.