LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 54 / 698

Chapter 4: Connecting External Equipment (Optional)
42
a. Plug one end of the cable into the remaining RJ-45 port on the
prior DX package.
b. Plug the other end into either RJ-45 port on an additional DX
package.
Repeat the same steps to cascade more DX packages.
Exception: You CANNOT cascade DX-PD2C5 sensor packages. One
SRC supports only one DX-PD2C5.
3. Connect the first DX sensor package to the SRC by plugging its
cable's connector into the RJ-45 SENSOR port of the SRC.
Warning: DX-PD2C5 or DX2-DH2C2 (or door handles), and asset
management strip(s) are mutually exclusive so do NOT connect both
of them to the SRC simultaneously.
Using an Optional DPX3-ENVHUB4 Sensor Hub
A Raritan DPX3-ENVHUB4 sensor hub increases the number of sensor
ports for the SRC.
Note that the sensor hub SRC supports is DPX3-ENVHUB4 instead of the
old hub DPX-ENVHUB4.
To connect Raritan sensor packages via the DPX3-ENVHUB4 hub:
1. Connect the DPX3-ENVHUB4 sensor hub to the SRC using a standard
network patch cable (CAT5e or higher).
a. Plug one end of the cable into the IN port (Port 1) of the hub.
b. Plug the other end of the cable into the RJ-45 SENSOR port of
the SRC.
2. Connect the Raritan sensor packages to any of the four OUT ports on
the hub.