![background image](http://html1.mh-extra.com/html/texas-instruments/dm38x-davinci/dm38x-davinci_user-manual_1097067579.webp)
Registers
579
SPRUHI7A – December 2012 – Revised June 2016
Copyright © 2012–2016, Texas Instruments Incorporated
High-Definition Video Processing Subsystem (HDVPSS)
Table 1-261. VPDMA_int1_client1_int_stat Register Field Descriptions (continued)
Bit
Field
Type
Reset
Description
5
INT_STAT_VIP1_UP_UV
W
0h
The client interface vip1_up_uv has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having received the End of Frame signal from the
transmitting module. This event will cause a one to be set in this
register until cleared by software. Write a 1 to this field to clear the
value.
4
INT_STAT_VIP1_UP_Y
W
0h
The client interface vip1_up_y has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having received the End of Frame signal from the
transmitting module. This event will cause a one to be set in this
register until cleared by software. Write a 1 to this field to clear the
value.
3
INT_STAT_VIP1_LO_UV
W
0h
The client interface vip1_lo_uv has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having received the End of Frame signal from the
transmitting module. This event will cause a one to be set in this
register until cleared by software. Write a 1 to this field to clear the
value.
2
INT_STAT_VIP1_LO_Y
W
0h
The client interface vip1_lo_y has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having received the End of Frame signal from the
transmitting module. This event will cause a one to be set in this
register until cleared by software. Write a 1 to this field to clear the
value.
1
INT_STAT_GRPX3_DAT
A
W
0h
The client interface grpx3_data has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having sent the End of Frame signal to the receiving
module. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
0
INT_STAT_GRPX2_DAT
A
W
0h
The client interface grpx2_data has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having sent the End of Frame signal to the receiving
module. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.