manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 99 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 99

E N T 7 0 5 0

Model Name:

RJ–4100

E N T 7 0 5 0

Model Name:

RJ–4100

Online/Function problems

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Text and printing data are garbled

(extra lines appear)

1-1

1-2

1-3

2-1

• Check whether reciprocal printing positions were able to be aligned.

→

Misalignment will produce printing that appears to be garbled.

Confirm:

Are the interface setups aligned?

No:

Align the printer communication setup with the communication setups on the computer
and driver side.

Yes: Go to 1-3
Reference: For details of the communication setup please refer to the item on “How to set

parameters” in the Operation Manual.

Confirm:

Is the current type of command setup the same as the commands on the driver side?

No:

Set up correctly to match the commands on the driver side.

Yes: Go to 2-1
Reference: For details of command setup please refer to the item on “How to set parameters”

in the Operation Manual.

Procedure: Investigate the current printer connection environment and report a printout of the setting details,

together with printing data that will enable the symptoms to be verified, to the your local dealer using
the prescribed format.

•

For how to take a print of the setting details, refer to “Control panel” in the Operation
Manual.

•

Data for printing should be able to be analysed by the printer. If it can not be dumped to a
file by the application and the driver, a data dump list from a comparatively simple diagram
will be satisfactory. (However, the data should enable the symptoms to be verified.)

•

Please include in the printer connection environment: the host computer, the application,
type of driver, the interface being used, length of cable, whether or not there is a switching
unit.

•

If possible, obtain a sample printout.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP7000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Online/Function problems

99

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments