manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 232 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 232

Pressure arm

Blade

Pressure arm

Pressure roller

Open

Open

R E P 1 2 2 3

Model Name:

RJ–4100

R E P 1 2 2 3

Model Name:

RJ–4100

How to replace the Pressure Assembly, Pressure Roller and Blade

How to replace the Pressure Assembly, Pressure Roller and Blade

GO TO

TEST NO

1001

TEST5

1000

TEST3

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

232

Blade Replacement

1. Open the front cover.
2. Use a fine straight screwdriver to slightly prize apart the blade

attachment and remove the blade.

CAUTION: When removing the blade, don’t use exces-

sive force to part it as there is a risk of dam-
aging the blade.

3. To refit, insert the blade on the pressure arm.

Pressure Roller Replacement

1. Follow the blade replacement procedure to remove the blade.
2. Use a fine straight screwdriver to slightly prize apart the pres-

sure roller attachment and remove the pressure roller.

CAUTION: When removing the blade, don’t use exces-

sive force to part the blade and pressure arm
as there is a risk of damaging the pressure
arm and the blade.

3. To refit, insert the pressure roller and then the blade on the

pressure arm.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments