manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 103 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 103

E N T 8 0 2 0

Model Name:

RJ–4100

E N T 8 0 2 0

Model Name:

RJ–4100

Other

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• The ink cartridges will not go in

1-1

1-2

1-3

• Ink cartridges may contain dye inks or pigment inks. Each type of ink comes in four colors. Are they all genuine

Mutoh cartridges?  Is each color cartridge being inserted into its particular position? 

→

Replace with genuine cartridges and try again.

• Cartridges must be inserted in the right direction. Are they mounted correctly?

→

Check the direction and mount them again correctly. 

• Are the ink cartridges pushed right to the back?

→

Make sure they are inserted properly. 

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP8000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Other

103

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments