R E P 1 5 7 4
Model Name:
RJ–4100
R E P 1 5 7 4
Model Name:
RJ–4100
Adjust the Tilt of the Print Head (Black)
Adjust the Tilt of the Print Head (Black)
GO TO
TEST NO
Item
Replacement and Adjustment Procedure
1. Adjustment
and
Verification
277
23. Next, check the printing and enter a positive value to move
the Color towards the Cap with respect to the Black or a
negative value to move in the opposite direction. Register
this value.
Repeat Steps 20 and 21 until the printing start position and
the Black and Color positions are aligned.
24. When the compensating numbers have been entered, press
[BACK] to return to the previous menu.
25. Implement the “Flush Pointer Adjustment”. (Refer to
BAC2110)
26. Implement the “Front and Cutter to Head Distance
Adjustments”. (Refer to BAC2130)
This will correct the distances between the Front Paper
Sensor and the Head, and the Cutter and the Head.
27. Use a steel ruler to measure from the leading edge of the
media to the printing position (set at 5 mm) and from the bot-
tom edge of the media to the printing position (set at 25
mm). Enter these measurements and return to the previous
menu.
28. Switch off the power to the printer and the adjustments are
finished.
Pitch between heads
Cutter to Head (25 mm)
Front of Paper to
Sensor Head (5 mm)