manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 89 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 89

E N T 6 0 0 0

Model Name:

RJ–4100

E N T 6 0 0 0

Model Name:

RJ–4100

Trouble with Media Cutting

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Does not cut normally

(Since there is no cutting of cut sheet
media, this item applies only to roll
media)

1-1

1-2

1-3

1-4

• Are there objects or paper scraps around the mechanism or cutter that are preventing the cutting action?

→

Remove the foreign matter and try again. 

• Is the cutter fitted properly at the cutter site?

→

Fit the cutter properly, making sure it is turned in the correct direction. 

• During cutting, does the cutter arm come away from the cutter?

→

Insert the cutter securely in the cutter arm.

• Is the cutter spring missing from the cutter holder?

→

The cutting action is failing due to a broken component. A new part must be requested.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP6000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Media Cutting

89

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments