manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 63 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 63

E N T 2 0 7 0

Model Name:

RJ–4100

E N T 2 0 7 0

Model Name:

RJ–4100

Trouble with Initialization

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Media is not suction

1-1

1-2

1-3

1-4

• Do the suction fans turn when the media has been mounted?

→

Carefully realign the media with the marker line so that it covers the front and rear paper sensors properly. 

• Is the media that is mounted media recommended by Mutoh? 

If it is not media recommended by Mutoh (especially thin tracing paper, etc.), the paper sensors may read
incorrectly and be unable to recognize the media. 

→

Mount recommended media and try again.

• Is there some foreign matter on the printing board which is preventing the suction?

→

Remove the foreign matter

• Is the pressure assembly plate or pressure roller about to be dislodged or out of place?

→

Refer to the exploded drawings and replace it and try again.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP2000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Initialization

63

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments